A wide range of
high quality cables

Current Carrying Capacity Multi Core Cables -BS 6004

CONDUCTOR	REFERENCE METHOD 4		REFERENCE METHOD 3		REFERENCE METHOD 1		REFERENCE METHOD 11OR 13
CROSS SECTIONAL	enclosed in conduit in		enclosed in conduit on a		clipped direct		on a perforated cable tray
AREA	thermally insulating wall etc		wall or in trunking etc				OR Free AIR

					2 cables	3 or 4	2 cables	3 or 4
	2 cables	3 or 4	2 cables	3 or 4	single phase	cables three	single phase	cables three
	single phase	cables three	single phase	cables three	a.c or d.c	phase a.c	a.c or d.c	phase a.c
	a.c or d.c	phase a.c	a.c or d.c	phase a.c	flat touching	flat touching	flat touching	flat touching
						or trefoil		or trefoil

mm2	A	A	A	A	A	A	A	A
1	11	10	13	11.5	15	13.5	17	14.5
1.5	14	13	16.5	15	19.5	17.5	22	18.5
2.5	18.5	17.5	23	20	27	24	30	25
4	25	23	30	27	36	32	40	34
6	32	29	38	34	46	41	51	43
10	43	39	52	46	63	57	70	60
16	57	52	69	62	85	76	94	80
25	75	68	90	80	112	96	119	101
35	92	83	111	99	138	119	148	126
50	110	99	133	118	168	144	180	153
70	139	125	168	149	213	184	232	196
95	167	150	201	179	258	223	282	238
120	192	172	232	206	299	259	328	276
150	219	196	258	225	344	299	379	319
185	248	223	294	255	392	341	434	364
240	291	261	344	297	461	403	514	430
300	334	298	394	339	530	464	593	497
400	-	-	470	402	634	557	715	597

REFERENCE METHODS OF INSTALLATION ARE DESCRIBED IN IEEE REGULATIONS & B.S. 7671

THESE ARE ALSO APPLICABLE TO CABLES WITH/WITHOUT CIRCUIT PROTECTIVE CONDUCTOR.